Do you need an advice?
Wire to Wire Splicing CWT
CWT terminators offers performance up to +125ºC, utilising cross linked, heat-shrinkable polyolefin insulation.
Product variants
| Name / part number | temperature min. [°C] | temperature max. [°C] | AWG | Add |
|---|---|---|---|---|
| CWT-2001 | -55 | 125 | 24 |
CWT-2001
Add
pc(s)
|
| CWT-2002 | -55 | 125 | 24 |
CWT-2002
Add
pc(s)
|
| CWT-2003 | -55 | 125 | 20 |
CWT-2003
Add
pc(s)
|
| CWT-3 | -55 | 125 | 0 |
CWT-3
Add
pc(s)
|
| CWT-3-1000 | -55 | 125 | 0 |
CWT-3-1000
Add
pc(s)
|
| CWT-3801 | -55 | 125 | 0 |
CWT-3801
Add
pc(s)
|
| CWT-3802 | -55 | 125 | 0 |
CWT-3802
Add
pc(s)
|
| CWT-3803 | -55 | 125 | 0 |
CWT-3803
Add
pc(s)
|
| CWT-3803-W1 | -55 | 125 | 22 |
CWT-3803-W1
Add
pc(s)
|
| CWT-3803-W2 | -55 | 125 | 22 |
CWT-3803-W2
Add
pc(s)
|
| CWT-3803-W3 | -55 | 125 | 0 |
CWT-3803-W3
Add
pc(s)
|
| CWT-3803-W4 | -55 | 125 | 26 |
CWT-3803-W4
Add
pc(s)
|
| CWT-3803-W5 | -55 | 125 | 26 |
CWT-3803-W5
Add
pc(s)
|
| CWT-3805 | -55 | 125 | 0 |
CWT-3805
Add
pc(s)
|
| CWT-3805-W1 | -55 | 125 | 22 |
CWT-3805-W1
Add
pc(s)
|
| CWT-3805-W2 | -55 | 125 | 22 |
CWT-3805-W2
Add
pc(s)
|
| CWT-3805-W3 | -55 | 125 | 0 |
CWT-3805-W3
Add
pc(s)
|
| CWT-3805-W4 | -55 | 125 | 26 |
CWT-3805-W4
Add
pc(s)
|
| CWT-3805-W5 | -55 | 125 | 26 |
CWT-3805-W5
Add
pc(s)
|
| CWT-3806 | -55 | 125 | 0 |
CWT-3806
Add
pc(s)
|
| CWT-3806-W1 | -55 | 125 | 22 |
CWT-3806-W1
Add
pc(s)
|
| CWT-3806-W2 | -55 | 125 | 22 |
CWT-3806-W2
Add
pc(s)
|
| CWT-3806-W3 | -55 | 125 | 0 |
CWT-3806-W3
Add
pc(s)
|
| CWT-3806-W4 | -55 | 125 | 26 |
CWT-3806-W4
Add
pc(s)
|
| CWT-3806-W5 | -55 | 125 | 26 |
CWT-3806-W5
Add
pc(s)
|
| CWT-3807 | -55 | 125 | 0 |
CWT-3807
Add
pc(s)
|
| CWT-3807-W1 | -55 | 125 | 22 |
CWT-3807-W1
Add
pc(s)
|
| CWT-3807-W2 | -55 | 125 | 22 |
CWT-3807-W2
Add
pc(s)
|
| CWT-3807-W3 | -55 | 125 | 0 |
CWT-3807-W3
Add
pc(s)
|
| CWT-3807-W4 | -55 | 125 | 26 |
CWT-3807-W4
Add
pc(s)
|
More products from the category: Wire to Wire Splicing
SGRT
SolderGrip terminals and disconnects utilise a spiral copper coil that grips and compresses the conductors and allows a pre-fluxed solder ring to flow to the centre of the splicing area, resulting in a highly reliable, repeatable joint.
B-202
SolderShield cable splices meet the growing performance requirements for shielded cable system fabrication and maintenance while minimising electromagnetic interference (EMI). Being one piece products consisting of a flux coated, solder impregnated copper hield braid encased in a heat shrinkable insulation sleeve, with crimp wire connectors. Conductor splices are made using MiniSeal crimp products which are recognised by MILS-81824 and MIL-W-5088.
B-070
These Feed-thru devices are designed to provide a high reliability water-resistant connection for a shielded or coaxial cable passing through a bulkhead or into equipment, when used with Thermofit boot and adhesive
1 pc/m
