Do you need an advice?
Wire to Wire Splicing D-406
Designed for OEM harness fabricators, repair and maintenance, plus accessory installations. DuraSeal Nylon crimp splices provide watertight sealing and protection against corrosion, abrasion, and vibration.
Product variants
| Name / part number | temperature min. [°C] | temperature max. [°C] | AWG | Add |
|---|---|---|---|---|
| D-406-0001 | -55 | 125 | 22 |
D-406-0001
Add
pc(s)
|
| D-406-0002 | -55 | 125 | 16 |
D-406-0002
Add
pc(s)
|
| D-406-0003 | -55 | 125 | 12 |
D-406-0003
Add
pc(s)
|
More products from the category: Wire to Wire Splicing
SGRT
SolderGrip terminals and disconnects utilise a spiral copper coil that grips and compresses the conductors and allows a pre-fluxed solder ring to flow to the centre of the splicing area, resulting in a highly reliable, repeatable joint.
B-202
SolderShield cable splices meet the growing performance requirements for shielded cable system fabrication and maintenance while minimising electromagnetic interference (EMI). Being one piece products consisting of a flux coated, solder impregnated copper hield braid encased in a heat shrinkable insulation sleeve, with crimp wire connectors. Conductor splices are made using MiniSeal crimp products which are recognised by MILS-81824 and MIL-W-5088.
B-070
These Feed-thru devices are designed to provide a high reliability water-resistant connection for a shielded or coaxial cable passing through a bulkhead or into equipment, when used with Thermofit boot and adhesive
1 pc/m
