Do you need an advice?
Boots 202G
Mechanical protection, sealing and tensile strain relief of cable-to-connector. This type of shaped part is used especially where there is a big difference between the size of the connector (adapter) and the cable. On the connector side, there is a shoulder which, when shrunk, fits into the recess on the connector of the heat-shrinkable molded parts. This finish provides better strain relief for the cable.
Product variants
| Name / part number | -- | material | adhesive | Add |
|---|---|---|---|---|
| 202G211-55 | fluoropolymer – flexible | 0 |
202G211-55
Add
pc(s)
|
|
| 202G221-55 | fluoropolymer – flexible | 0 |
202G221-55
Add
pc(s)
|
|
| 202G242-55 | fluoropolymer – flexible | 0 |
202G242-55
Add
pc(s)
|
|
| 202G253-55 | fluoropolymer – flexible | 0 |
202G253-55
Add
pc(s)
|
|
| 202G611-55 | fluoropolymer – flexible | 0 |
202G611-55
Add
pc(s)
|
More products from the category: Boots
202A
Mechanical protection and strain relief. As the part does not have a lip it can be installed directly onto the connector accessory thread.
202D
Mechanical protection and cable connector strain relief. Ideal for applications where only a small number of contacts are utilised, resulting in the need for a high ratio boot to match the connector to cable diameter
202F
Mechanical protection and strain relief. Part includes a lip or lips as required, can be installed onto circular adaptors of the appropriate shell size.
1 pc/m
