Do you need an advice?
Boots 204W
Mechanical protection, sealing and tensile strain relief of cable-to-connector. This type of shaped part is used especially where there is a big difference between the size of the connector (adapter) and the cable. On the connector side, there is a shoulder which, when shrunk, fits into the recess on the connector of the heat-shrinkable molded parts. This finish provides better strain relief for the cable.
Product variants
| Name / part number | -- | material | adhesive | Add |
|---|---|---|---|---|
| 204W201-25/225-0 | elastomer – chemically resistant | S1125 |
204W201-25/225-0
Add
pc(s)
|
|
| 204W221-25-0 | elastomer – chemically resistant |
204W221-25-0
Add
pc(s)
|
||
| 204W221-25-G03-0 | elastomer – chemically resistant | 0 |
204W221-25-G03-0
Add
pc(s)
|
|
| 204W221-25-G03/225-0 | elastomer – chemically resistant | 1 |
204W221-25-G03/225-0
Add
pc(s)
|
|
| 204W221-25/225-0 | elastomer – chemically resistant | S1125 |
204W221-25/225-0
Add
pc(s)
|
|
| 204W511-25-0 | elastomer – chemically resistant | 0 |
204W511-25-0
Add
pc(s)
|
More products from the category: Boots
202A
Mechanical protection and strain relief. As the part does not have a lip it can be installed directly onto the connector accessory thread.
202D
Mechanical protection and cable connector strain relief. Ideal for applications where only a small number of contacts are utilised, resulting in the need for a high ratio boot to match the connector to cable diameter
202F
Mechanical protection and strain relief. Part includes a lip or lips as required, can be installed onto circular adaptors of the appropriate shell size.
1 pc/m
